LEIMI Men's Latex Rubber Cycle Shorts with Sheath Latex Pants

Wearing In general latex clothes are designed to be tight-fitting. Therefore they can be difficult to put on without the aid of a lubricant. There are 3 main methods of preparing latex catsuit for wearing. (1) Lightly dust the inside of the garment with talc before putting on, because stray talc and dust is very visible against the rubber. (2) Use a silicone-based lubricant. Apply a thin coating to the inside of the garment and your skin if necessary. (3) A third method of reducing or eliminating the high friction of latex when dressing is to chlorinate the rubber. Rubber can easily be marked or torn with fingernails if excessive force is used when pulling on your garment. Make sure your garment is well lubricated or talced. You may also wish to wear a pair of light cotton gloves to avoid any damage Polishing Your garment will have been delivered to you unshined. To shine, we recommend you use a silicone based polish, such as lsquoEros Bodyglidersquo or lsquoEros Cult Dressing Aid Do not rub the outer surface of your garment too hard, or with a rough cloth, as the glossy surface can be permanently scratched. Cleaning You can wash rubber garments in clean, warm water. Avoid detergents and soaps. Always wipe away excess water with a soft towel and leave to dry flat or hung up to drip dry. Rubber can be scratched if rubbed too hard, so be gentle. Never tumble dry, dry clean or iron your garment. Storage Latex clothes are best stored hung up in a cupboard away from sources of heat, light (particularly bright sunlight and strong UV light which will degrade light coloured clothes), metals, oils, solvents, greases and fire. Avoid damp storage conditions

• Material:100% nature latex, 0.4mm
• Cycle shorts with attached sheath is 6" in length and 5" diameter
• Mold item with sheath assembly
• Perfect for club, party, carnival, Halloween, Christmas and other holiday cosplay or daily use