High-Pressure misting nozzles for Outdoor Cooling Systems Outdoor Cooling nozzles, UNC 10/24 misting nozzles, Silver, 50 Pieces 0.2mm Orifice Dia Stainless Steel 2 Sections

Note: If the faucet connection is not good, you can wrap a piece of sealing tape on the faucet to make the connection betterSpecification:Name: 3/16" external thread high pressure atomizing nozzleNozzle material: stainless steel/brass nickel platedNozzle connection size: 3/16" threadNozzle diameter: 0.1mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mmPressure: 20bar90barPurpose: humidification, dust removal, cooling, and beautifying the environment.This anti-drip nozzle is usually made of stainless steel/and brass. It contains an anti-drip device. The liquid flows at a high speed of 10-70kg/300-1000psi. It forms a centrifugal vortex as it passes through the blades, and is then ejected from the nozzle as a fine mist. .This nozzle is well made and costs 10 times less than air humidification.NotesThere may be 1-2mm error due to manual measurement.Due to differences between monitors, images may not reflect the actual color of the item. Thank you!

• (50pcs)There are two materials: One is nickel-plated brass material, with ceramic orifice plate and filter, which is drip-proof, rust-proof, durable and leak-proof. The other one is made of stainless steel, equipped with stainless steel orifice plate and filter, which is drip-proof, rust-proof, durable and leak-proof. (Stainless steel is stronger and has stronger rust resistance)
• (50pcs)Anti-clogging: The stainless steel/brass nickel-plated atomizing nozzle adopts a detachable body design. When the nozzle has low flow rate or poor spray performance due to blockage, just disassemble the nozzle and clean it under running water with a soft brush. . Cleanable and reusable nozzles save you money! Compared with the 2-section, the 3-section has one more filter, so it can be used for a longer time.
• (50pcs)Orifice diameter:0.1mm-0.8mm to choose from. Textile paper making is afraid of water and can choose 0.1/0.15mm diameter. Breeding greenhouses are most suitable for 0.2/0.3mm. The larger the diameter of other orifices, the greater the water output of the orifice diameter.
• (50pcs)Easy to Install：The brass misting nozzle is easy to install and can easily screw into any 3/16-inch (UNC 10/24) threaded misting nozzle opening. High-pressure outdoor anti-drip atomizing nozzle,10-70kg working pressure, 60-110ml/min flow rate. It is recommended to increase the use of a pump to achieve better spray effects.
• (50pcs)Wide range of uses：Atomizing nozzles are widely used in outdoor cooling systems, agricultural irrigation systems, greenhouses, spray disinfection, epidemic prevention, deodorizing air purification, landscaping, small fountains, etc.