Grünbeck Boxer RDX 101530 Backwash Filter DN 25 (1 Inch) for Filtration of Drinking Water with Accessories Multi-Coloured

Boxer RDX Backwash Filter – 101530 Purpose The Boxer RDX backwash filters are designed for filtration of drinking water. The Boxer RDX filter with pressure regulator is also suitable for adjusting the pressure on the removal side. They can be used in the pressure/vacuum range. The adjustment of the reprint on the removal side only works when used in the printing area. Filters are not suitable for circulation water treated with chemicals. They are not suitable for oils, greases, solvents, soaps and other lubricating media and also not for separating water-soluble substances. The filters protect the water pipes and the connected water-carrying system parts from malfunctions and corrosion damage caused by undissolved impurities (particles), such as rust particles, sand, etc. Technical details: Connection nominal width: DN 25. Connection size: 1 inch. Installation length with/without connection: 182/100 mm. Depth to centre connection: 165 mm. Empty weight: 2.2 kg. Box contents: Backwash filter with connection flange. Water meter connection. gaskets Pressure regulator cartridge. Pressure gauge. Operating instructions (English language not ). Grünbeck water filter... … A small company for the distribution of water treatment products became a large manufacturing and research company. In the company group, a total of 900 people do their best every day. In all these years, the core values have always remained the same: responsibility for future generations and a corporate culture in which constructive cooperation plays an essential role.

• The BOXER RDX backwash filters are intended for filtration of drinking water.
• They protect water pipes and the connected water-bearing system parts from malfunctions and corrosion damage caused by unsolved contaminants, such as rust particles, etc.
• The filters can be used in the pressure and negative pressure range. The reprint setting on the pick side only works when used in the print area.
• The filters are designed in accordance with the requirements of DIN EN 13443-1 and DIN 19628 and are intended for installation in the drinking water installation according to DIN EN 806-2 (installation immediately after the water meter system).
• Box contents: backwash filter with connection flange, water meter fitting, seals, pressure reducer cartridge, pressure gauge, operating instructions (cannot guarantee instructions are in English)