All in one RJ45 Network Caber Tester, 4" IPS Touch Screen UTP Cable Tester,Rechargeable Ethernet Cable Tracer,Support Network Tools, POE++ Detect,Cable Length Meter,RJ45 TDR Test,NCV,FTP (LT-600T) (L)

Product description: All in one Multifunction Network Cable Tester LT-600T The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.All Features Multifunction Network Cable TesterMerchant Video1TDR Cable Test2Camera Level Meter3Digital Multi-meters4V Fault Locator5Optical Power Meter

• [ TDR & OPM & VFL & DMM] WANLUTECH Rechargeable network cable tester has a 4'' IPS touchscreen. Built-in TDR Cable Breakpoint Short Circuit Test: support to test BNC coaxial cable, network cable, telephone cable, RVV cable, AVVR cable, length measurement (up to1.2 KM ) and short circuit. Digital Multimeter( DMM ), auto-detects DC Voltage/AC Voltage/Resistance/Buzzer Mode. Optical Power Meter( OPM ), support calibrated wavelength 850/980/1270/1300/1310/1490/1550/1577/1625/1650nm, power range -70~+6dBm). Visual Fault Locator (VFL), It is used to detect fiber for breakage, cracking, bending and other faults
• [ Network Cable Tester ] WANLUTECH Digital Tone Cable Tracer: searching for BNC cable, network cable and telephone cable from cluttered cables,also can search shielded network cables. Wire Map Continuity Test: test UTP cable connection status and display on the screen, support detect the near-end, mid-end and far-end fault point of the RJ45 cable plug. RJ45 Cable TDR Test: it can test cable pair status, length, attenuation, reflectivity, impedance, skew. Cable length measurement, used to measure cable length, breakpoints and short circuits, test length max 3000meters
• [ PoE Check & Network Testing Tool & Level Meter ] It is used to detect whether the connected PoE Power Sourcing Equipment (PSE) is standard or non-standard PoE; supports standard IEEE 802.3af/at/bt detection. Multifunctional Network Testing Tools: Quick IP discovery, Ping test, IP scan, LLDP/CDP, Port flashing, etc. Measurement of peak value, sync level, and burst level for CVI/TVI/AHD/CVBS video signals
• 【PD Power Detection & NCV Detection & FTP】PD power test can detect whether the power output of the POE switch is normal, and detect the pins used for power supply. Inductive NCV scan function. Sound and light dual alarms, supporting the distinction between live and neutral wires. The FTP function enables users to copy test report and data via network FTP.
• 【Battery & Service】4 inch IPS touch screen, 800*480 resolution. The emitter and receiver both built-in rechargeable battery, (max 3.7V 4000mAh lithium-ion.)Powerful battery life and you don't need to replace the batteries. Of cause,we will do our best to provide the best service we can, so you don't need to worry about anything.