15 psi Water Pressure Reducer Regulator for Drip Tape, 3/4 inch Hose Thread, 120 psi Max Inlet Pressure, Lead-free Brass, Low Flow Rate, Qty: 2

This heavy duty 15 psi lead-free brass pressure reducer regulator is ideally suited for use with soaker hose, drip systems, drip lines, and emitters, or any application where low water pressure is desired. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden faucet in the USA and Canada.

• Qty: 2. Maintains water pressure between 10-20 psi (15 psi nominal), which is great for drip tape, soaker hose systems, and any application where low pressure is desirable. It may also be used with drip systems.
• Low flow rate to save water. Approximately 2.5 GPM (gallons per minute) at 10 psi and 7.5 GPM at free flow. Maximum Inlet Pressure: 120 psi. May be left under constant pressure. Note: As with most drip system pressure regulators, the outlet pressure might slowly build up above 20 psi if the outlet is completely shut.
• Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada.
• It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead. Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.
• Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.